Your current position: Home >> The use of fusible interlining
The use of fusible interlining¡¡Published by£º2021-06-09¡¡¡¡Categories:Industry news¡¡Viewed by: 5237 times The collar of the clothes needs special collar lining, which is divided into hard collar lining and soft collar lining. The collar lining should be cut with clean sample The collar can be 45 ° Oblique cutting, also can be cut horizontally (as required), so the collar can be beautiful, different styles of clothing collar pictures (made by the three brothers by hand)
Take shirt as an example
The rubber surface of the collar is generally flat. It looks like a bright layer of glue. Pressing temperature of collar: 170 ¡æ + steam
Method 1: fold the lining, draw the sample with 1 / 2 clean collar and draw it on the lining. Then cut off the net collar. Tip: when cutting, do not cut out of place.
Method 2: lay the lining flat, glue the surface down, then draw the complete collar with the clean sample, and then cut off the net collar. This kind of cut collar is not easy to dislocation. The rubber lining, which needs high temperature to melt, is about 170 ¡æ + steam. Tip: 170 ¡æ, generally in the iron "cotton, hemp" gear, this made the collar, flat and straight, in addition to the coat collar, also to cut into a clean collar, generally collar is used on the collar. Western suit collar cut: cross cut of collar, neck bottom 45 ° The thin collar is used for the collar of the oblique cut suit. |
Contact:YU Qinxian Tel:+86-13587903622 E-mail£ºcathy@sanjininterlining.com Fax£º+86-0572-6603299 |