1
2
3
Industry news

Do you know the use of adhesive lining in garment technology

Updated by:2021-08-17 Categories: Industry news 

 In the application of adhesive lining, we should first clarify which parts of clothing should use adhesive lining and the role of lining (different lining parts also play different roles). The lining parts of clothing can be summarized into the following situations

 
1. Forepart
 
It refers to the predecessor parts of coats and suits made of exquisite fabrics such as wool or fabrics with certain body bones. Generally, the coat made of light and thin fabrics does not need to be pasted. The bonding of the front part can be divided into the following two cases( 1) There is no division at the front part: the adhesive lining of the front should be large rather than small( 2) The front part is divided longitudinally: the front half is all lined with adhesive lining, and the rear half only needs to be lined with adhesive lining in the upper half. The front part shall be cut slightly larger in consideration of the insufficient size of the garment due to the retraction of the adhesive lining in case of heat. After the lining is completely cooled, it shall be trimmed accurately with paperboard. The front part is lined to shape and preserve the shape of the whole garment.
 
2. . edge opening
 
It refers to the inner flap of the door, collar without collar, cuff, bottom edge, etc. It plays a role in local modeling, reinforcement and reinforcement of clothing.
 
3. Parts
 
It refers to the collar, sleeve, belt, waist of skirt and trousers, bag cover, bag inlay line and other parts. Since the parts are mostly composed of double-layer cloth inside, one layer of face or one layer of lining can be glued according to the specific situation. Sometimes both sides can be glued for the above bonding. It should be noted that the surrounding of the bonding and lining should generally be less than 0.4 cm.
 
4. Bag opening position
 
It refers to a kind of pocket whose opening needs to be cut. The adhesive lining shall be adhered to the opening on the opposite side of the fabric at the opening of the bag, and 1 cm to l shall be released all around_ About 5cm, it can strengthen and preserve the shape of clothing.
 
5. Special adhesive parts refer to those parts fixed with adhesive lining traction belt in order to prevent tensile deformation of some parts. The adhesive lining traction belt is generally a thin belt 0.8 ~ 1.6 cm wide.


Products Recommended